Here’s a list of common Big Joe forklift fault codes and their potential meanings. Please note that this is a general guide, and you should always refer to your specific Big Joe forklift’s service manual for the most accurate information and troubleshooting steps.
Big Joe Forklift Fault Codes List
- E10: Battery Voltage Low. Check battery connections, charge the battery, or replace the battery if necessary.
- E20: Motor Overheat. Allow the motor to cool down. Check for obstructions or excessive load. Inspect motor brushes.
- E30: Accelerator Potentiometer Fault. Inspect the accelerator potentiometer and its wiring. Replace if needed.
- E40: Brake Fault. Check the brake system for proper operation. Inspect brake switch and wiring.
- E50: Lift Limit Switch Fault. Inspect the lift limit switch and its wiring.
- E60: Travel Limit Switch Fault. Inspect the travel limit switch and its wiring.
- E70: Controller Fault. Indicates a problem with the motor controller. Requires further diagnosis and potential repair or replacement.
- E80: Communication Error. Indicates a problem with communication between different components. Check wiring and connections.
- E90: Steering Fault. Check the steering system components and wiring.
Important Considerations:
- Always consult the specific service manual for your Big Joe forklift model.
- Fault codes can sometimes have multiple causes. Thorough troubleshooting is essential.
- If you are not comfortable performing repairs, consult a qualified forklift technician.
- Proper maintenance and regular inspections can help prevent fault codes.
This information is for general guidance only and may not apply to all Big Joe forklift models. Always refer to your specific model’s service manual for the most accurate and up-to-date information.
